Pocket TDS tester LD-LPTS-A11
SKU: LD-LPTS-A11Pocket TDS testerLD-LPTS-A11is equipped with platinum sensor & 1 point push button calibration system. It comes with midium range for TDS measurement. It is easy to use & with waterproof features design it provides protection against harsh conditions. The standard platinum sensor provides fast and reliable measuring results. Total dissolved solid content present in drinking water, waste water, swimming pool & aquarium water can be measured using pocket TDS meter.
- ✓ Selectable TDS conversion factor for accurate measurements
- ✓ 1 point push button calibration to adjust the display value to known standard
- ✓ Equipped with platinum sensor
- ✓ Midium range of TDS measurement
- ✓ Automatic temperature compensation for accurate measured value over the entire range
- ✓ Auto hold function freezes stable, final readings for better viewing and recording
- ✓ Automatic power off helps to reduce battery power consumption
- ✓ Waterproof features guarantees protection against harsh conditions
- ✓ Replaceable electrode module to reduce the maintenance , replacement cost
Also available in:
TDS range : 0.5 - 100.0 ppm
TDS range : 0.05 - 10.00 ppt
TDS range : 0 - 20 ppt
TDS range : 5 - 1000 ppm
| Power | 3 × 1.5 V “G13A” |
| Weight | 100 g |
| Display | LCD screen |
| Connector | 6 pin |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| TDS range | 5 - 1000 ppm |
| TDS factor | 0.4 to 1.0 (default 0.5) |
| Battery life | Approximately 150 hours |
| TDS accuracy | ± 1 % F.S. |
| TDS type range | Mid-range TDS |
| Type of sensor | Platinum sensor |
| Calibration points | 1 point |
| Data hold function | Manual |
| Calibration solutions | 744.7 ppm |
| Dimension (L × dia.) | 185 × 40 mm |
| Operating temperature | 0 °C - 60 °C, 32 °F - 140 °F |
| Temperature coefficient | 2 % per °C |
| Temperature compensation | 0 °C - 50 °C, Automatic |
| Normalization temperature | 25 °C |
Pocket TDS tester is used to measure TDS content in waste water, swimming pool & aquarium, pure water, drinking water. It is also used in educational and other industrial applications for TDS measurement from test samples.
Similar Products
Portable Ion Meter LPIM-A10
✓ pH Range : -2.000 to 20.000 pH
✓ pH Resolution : 0.001 / 0.01 / 0.1, selectable
Portable Turbidity Meter LTM-A10
✓ Measuring range (NTU) : 0 to 200
✓ Minimum readout value (NTU) : 0.1
Portable Turbidity Meter LTM-A11
✓ Measuring range (NTU) : 0 to 100,0 to 200
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A12
✓ Measuring range (NTU) : 0 to 100,100 to 400
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A13
✓ Measuring range (NTU) : 0 to 100,100 to 500
✓ Minimum readout value (NTU) : 0.01, 0.1
