Bench top Turbidity Meter LD-LTM-B11
SKU: LD-LTM-B11Bench top turbidity meterLD-LTM-B11with microprocessor controlled system, works on 90° scattered light principle to measure water turbidity in nephelometric turbidity unit i.e. NTU. The formazine standard solution of turbidity mentioned in ISO 7027 is used for turbidity analysis. This turbidity meter delivers highly accurate results with better numerical calculations to meet GLP standards.
- ✓ Quick and automatic multi-points calibration
- ✓ Back light LCD display with touch keypad
- ✓ Wide measurement range
- ✓ Non- linear data processing and transfer
- ✓ Selectable automatic or manual switch mode
- ✓ High through put stability
- ✓ Auto power off function
- ✓ Easy to operate
Also available in:
Measuring range (NTU) : 0 to 200
Measuring range (NTU) : 0 to 100,0 to 200
Measuring range (NTU) : 0 to 100,100 to 400
Measuring range (NTU) : 0 to 100,100 to 500
Measuring range (NTU) : 0 to 100,100 to 800
Measuring range (NTU) : 0 to 100, 100 to 1000
| Memory | Stores up to 20 sets data |
| Weight | 2.5 kg |
| Detector | Silicon photodiode |
| Dimension | 400 × 300 × 250 mm |
| Zero drift | ± 0.5 % F.S. |
| Error value | ± 6 % (± 2 % F.S) |
| Light source | Infrared-emitting diode (850 nm λ) |
| Power supply | AC 220 V, 50 Hz |
| Sample volume | 5 to 10 ml |
| Power batteries | DC 1.5 V, 5 AA alkaline batteries |
| Reset functions | Yes |
| Principle method | 90° scattered light |
| Calibration point | 3 |
| Working temperature | 5 to 40°C |
| Measuring range (NTU) | 0 to 50, 0 to 100, 0 to 200 |
| Operating temperature | 5 to 40°C |
| Minimum readout value (NTU) | 0.01, 0.1 |
Used in water treatment plants, swimming pool, water recycling units, research and quality laboratories of pharmacy, life science, food, and beverage industry.
Similar Products
Multi parameter water quality analyzer LMWA-A10
Multi parameter water quality analyzer LMWA-A11
Multi parameter water quality analyzer LMWA-A12
✓ Wavelength Range : 190-1100 nm
✓ Optical path stability : ≤ ±0.002 Abs/h
Portable Multiparameter Water Quality Analyzer LMWA-B10
✓ Measuring Parameters : COD, Ammonia Nitrogen, pH, DO, Temperature, Conductivity, TDS, Chlorophyll, Blue-Green Algae, ORP
✓ Relative Humidity : 10 – 90% RH