Lab-Equipment > Water-Testing > BOD-Analyzer > Portable Conductivity Meter LD-LPCM-A11
Features
- Common features
- Calibration due reminder informs operator to calibrate the meter regularly
- Stability indicator displays the status of current measurement
- Auto hold function freezes stable, ï¬nal readings for better viewing and recording
- 1 to 5 points push button calibration to automatically identify calibration solutions
- Selectable temperature units (°C or °F) for different application requirements
- Expanded memory stores and recalls up to 500 readings
- Calibration report provides details of calibration standard and cell constant
- Help message as an operational guide, helps users for quick access to the parameters
- Reset function automatically resumes all settings back to factory default options
- Store data is transferrable into computer via USB communication interface
- Conductivity / TDS/ Temperature
- Conductivity: 1 to 5 point calibration with automatically identification of calibration solutions
- Temperature: Can select cell constant (0.1/1/10) and normalization temperature 20°C or 25°C
- TDS and Salinity: TDS conversion factor to meet different water quality measurement requirements
- linear and pure water compensation improves the measurement accuracy
Portable Conductivity Meter LD-LPCM-A11
Portable Conductivity MeterLD-LPCM-A11is adapted with different modes for measuring quality of water on parameters such as conductivity, TDS and temperature. Due to its portable design, it is suitable for outdoor measurements i.e. on site water testing, remote area water testing and for research purpose. It is reliable and user friendly.
SKU Code: LD-LPCM-A11
Also Available in below capacities
Conductivity :
- Specifications
- Product Applications
| TDS | |
| Power | 3 × 1.5 V AA batteries or DC 5 V power adapter |
| Memory | 500 data sets |
| Weight | 300 g |
| Connector | 6 pin mini plug |
| Data hold | Manual or auto-end point |
| TDS factor | 0.01 to 1.00 (Default 0.5) |
| Temperature | |
| Conductivity | |
| TDS accuracy | ±1 % F.S |
| Cell constant | K= 0.1, 1, 10 or custom |
| Power Control | Manual or Automatic (10, 20 or 30 minutes after last key pressed) |
| TDS resolution | 0.01, 0.1, 1 |
| Calibration due | 1 to 31 days or off |
| Stability conditions | Low or high |
| Reference temperature | 20 °C or 25 °C |
| Conductivity accuracy | ±0.5% F.S |
| Temperature resolution | 0.1 °C, 0.1 °F |
| Conductivity resolution | 0.001, 0.01, 0.1, 1 |
| Dimension (L × W × H) | 170 × 85 × 30 mm |
| Temperature coefficient | Linear and Pure water compensation |
| Temperature compensation | 0 to 100 °C, 32 to 212 ° F, Manual or Automatic |
| Temperature calibration points | 1 point |
| Temperature measuring accuracy | ± °0.5 C, ± 0.9 °F |
| Conductivity calibration points | 1 to 5 points |
| Conductivity calibration solutions | 10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom |
| Used for quality testing of water on different parameters in research and development labs, water resources and plants in nearby or remote area. |
